Functional Safety Certification for Pick-and-Place Robots: OSHA 1910.212 Explained

Date
2026-09-10
Location
Online
Host
Zach L

About this event

A Mock Exam Session for System Integrators pursuing functional safety certification. A live 30-minute mock exam session on OSHA 1910.212 (Machine Guarding) for pick-and-place robots, built for system integrators pursuing functional safety certification. What We'll Cover: What OSHA 1910.212 (Machine Guarding) requires and how its scope applies to pick-and-place robots Mapping OSHA 1910.212 clauses to the certification evidence assessors expect System-specific hazards and safety functions typical of pick-and-place robots Common findings that delay certification, and how to avoid them A practical readiness roadmap for system integrators preparing for assessment Related topics: OSHA 1910.212 · Pick-and-Place Robots · functional safety certification · functional safety assessment · Mock Exam Se

Topics

Registration

View event page

About OSHA 1910.212 (Machine Guarding)

This event covers the compliance, engineering, and verification requirements defined by OSHA 1910.212.

29 CFR 1910.212 is OSHA's general machine guarding regulation: one or more methods of machine guarding shall protect operators and others from hazards such as point of operation, ingoing nip points, rotating parts, and flying debris.

What it regulates

The employer's duty to guard machine hazards in US workplaces; guard attachment, point-of-operation protection, and anchoring of fixed machinery — enforced with citations and referenced alongside consensus standards for state of the art.

Who must comply

US employers operating machinery; integrators indirectly, since employers demand equipment enabling compliance.

Key requirements of OSHA 1910.212

  • General requirement: guarding methods per hazard
  • Point-of-operation guarding duty where exposure exists
  • Guard construction: attached to machine where possible, no new hazards
  • Machines requiring anchoring

Key concepts: OSHA 1910.212

General Duty linkage
Where 1910.212 is unspecific, OSHA leans on ANSI/ISO consensus standards to define recognized hazards and feasible abatement.
Employer responsibility
Unlike CE's manufacturer focus, OSHA places the operating duty on the employer — imported unguarded machines become the buyer's problem.
Point of operation
Where work is performed on material — the highest-priority guarding location.

Frequently asked questions: OSHA 1910.212

Does meeting OSHA equal meeting ANSI/ISO?

No — OSHA text is minimal and old; professional practice (and defensibility) means applying current consensus standards (ANSI B11 series, R15.06, ISO equivalents), which OSHA references in enforcement.

Who is liable for an unguarded imported machine?

The employer using it — US law does not CE-style oblige the foreign manufacturer; buyers must specify and verify guarding and safety functions contractually.

Standard information based on the published text of OSHA 1910.212 (Machine Guarding). Event content is provided by the host. For authoritative guidance, consult the official standard body.