Functional Safety Certification for Automated Guided Vehicles (AGVs): ANSI/ITSDF B56.5 Explained

Date
2027-07-05
Location
Online
Host
Zach L

About this event

A Worked-Examples Session for Auditors pursuing functional safety certification. A live 30-minute worked-examples session on ANSI/ITSDF B56.5 (Guided Industrial Vehicles) for automated guided vehicles (agvs), built for auditors pursuing functional safety certification. What We'll Cover: What ANSI/ITSDF B56.5 (Guided Industrial Vehicles) requires and how its scope applies to automated guided vehicles (agvs) Mapping ANSI/ITSDF B56.5 clauses to the certification evidence assessors expect System-specific hazards and safety functions typical of automated guided vehicles (agvs) Common findings that delay certification, and how to avoid them A practical readiness roadmap for auditors preparing for assessment Related topics: ANSI/ITSDF B56.5 · Automated Guided Vehicles (AGVs) · functional safety c

Topics

Registration

View event page

About ANSI/ITSDF B56.5 (Guided Industrial Vehicles)

This event covers the compliance, engineering, and verification requirements defined by ANSI/ITSDF B56.5.

ANSI/ITSDF B56.5 is the US safety standard for driverless, automatic guided industrial vehicles: design, operation and maintenance requirements for AGVs including braking, speed, load handling, and object detection, maintained by the Industrial Truck Standards Development Foundation.

What it regulates

Vehicle braking performance, contact and non-contact sensing behavior, warning devices, and user responsibilities for guide paths, clearances and training in US facilities.

Who must comply

AGV suppliers and US warehouse/factory operators — often applied together with R15.08 as fleets gain autonomy.

Key requirements of ANSI/ITSDF B56.5

  • Braking and stopping distance requirements versus detection range
  • Sensing: bumper (contact) and non-contact detection behavior on detection
  • Operational rules: speeds, load stability, intersections
  • User obligations: maintenance, training, floor and path upkeep

Key concepts: ANSI/ITSDF B56.5

Contact bumper legacy
Traditional AGV compliance via mechanical bumpers stopping on touch — increasingly replaced by scanner-based non-contact detection.
Stopping within detection distance
The core equation: worst-case stop must complete inside the sensing envelope for load and speed.
User path responsibility
The site owns clearances, markings and traffic rules the vehicle assumes.

Frequently asked questions: ANSI/ITSDF B56.5

B56.5 or R15.08?

B56.5 covers classic guided AGVs; R15.08 addresses autonomous mobility and mobile manipulation. Modern AMR deployments in the US typically reference both, with R15.08 leading for free-navigating fleets.

Standard information based on the published text of ANSI/ITSDF B56.5 (Guided Industrial Vehicles). Event content is provided by the host. For authoritative guidance, consult the official standard body.